Cleaning Prep:
Close the icemaker water supply line shut-off valve.
Remove the
Front Panel
, move the
control switch
to
DRAIN
.
Make sure the
power switch
is
ON
. Replace the
Front Panel
.
Allow the water system to drain completely. Remove the
Front
and Top Panels
, move the
power switch
to
OFF
.
Remove all ice
from the ice storage bin and/or dispenser
.
ATTENTION! IF ON DISPENSER,
turn off the dispenser power supply after dispensing
all the leftover ice.
Cleaning:
Remove the
Spout-to-Chute Strap
(includes
Drip Guide
on F-1501 and
larger), then remove the
Spout
.
Dilute Hoshizaki
Scale Away
with
warm water (see Table).
Pour the cleaning solution over the
Extruding Head
until the
Evaporator
Assembly
and
Reservoir
are full,
and the solution runs out through the
Overflow Hose
.
Replace the
Spout
,
Spout-to-Chute Strap
, and
Drip
Guide
(if applicable) in their correct positions.
Allow the icemaker to soak for
10 minutes
.
Cleaning Solution
Scale Away
9.6 fl. oz (0.29 l)
Warm Water
1.6 gal. (6.0 l)
Ice Machine
F-450MAJ(-C)
FD-650MAH-C, MWH-C, MRH-C
F-801MAJ(-C), MWJ(-C)
F-1002MAJ(-C), MWJ(-C), MRJ(-C), MLJ
FD-1002MAJ-C, MRJ-C
F-1501MAJ(-C), MWJ(-C), MRJ(-C)
F-2001MWJ, MRJ/3(-C), MLJ
Sanitizing:
x
Dilute 5.25% chlorine
bleach
‡
with warm water
(see Table below)
Sanitizing Solution
Bleach
9.6 fl. oz (0.29 l)
Warm Water
1.6 gal. (6.0 l)
‡
Use bleach without additives.
x
Remove the front and top
panels
x
Move the power switch to OFF
x
Remove the spout-to-chute
strap
(includes drip guide on F-1501
and larger)
x
Remove the spout
x
Pour the sanitizing solution
over the extruding head until
the evaporator assembly and
reservoir are full, and the
solution runs out the overflow
hose
x
Replace the spout, spout-
to-chute strap, and drip
guide (if applicable) in their
correct positions.
x
Allow the icemaker to sit for
10 minutes before operation
x
Move the control switch to
ICE
x
Move the power switch to ON
x
Replace the panels in their
correct positions
x
Make ice using the solution until
the icemaker stops making ice
Cleaning & Sanitizing
AMMONIA
Cleaners
The icemaker and dispenser must be cleaned & sanitized at least twice a year.
ATTENTION!
DO NOT
leave icemaker
unattended when panels are off
Tech Support: 1.800.233.1940
1
2
3
R
(i
5
15
16
16
D
6
Page 1
#51055 | 02.21.2018
To Icemaker
Or Water Filter
SHUT OFF
4
dŽƉ
ZŝŐŚƚ^ŝĚĞ
&ƌŽŶƚŽĨ
ŝĐĞŵĂŬĞƌ
ŽŶƚƌŽů^ǁŝƚĐŚ
WŽǁĞƌ^ǁŝƚĐŚ
Pour Solution into
Pour Solution into
Extruding Head
17
1
continued on the back…
17
18
dŽƉWĂŶĞů
>ĞĨƚ^ŝĚĞ
WĂŶĞů
ZŝŐŚƚ^ŝĚĞ
WĂŶĞů
&ƌŽŶƚ
WĂŶĞů
Page 28