Cleaning Prep:
Remove the
Front Panel
, move the control switch to
OFF
.
After
3 min
., move the switch to
ICE
, then replace the panel.
After
3 min
., remove the
Front Panel
, move the switch to
OFF
.
Remove all ice
from the ice storage bin and/or dispenser
.
WARNING! IF ON DISPENSER,
turn off the dispenser power
supply after dispensing all the leftover ice.
Cleaning:
Remove the
Front Insulation Panel, Cube Guide B & A, Overflow Cap & Pipe,
Water Shield,
and
Drain Plug
. After the water tank has drained, replace all items.
NOTICE! DO NOT
cross thread the drain plug or
overflow pipe.
Refill water tank by moving the control switch to
ICE
,
replace the
Front Panel
. After
3 minutes
, remove
Front
Panel
, move switch to the
OFF
position.
Remove the
Front Insulation Panels
. Pour
14 fl.oz
(414 ml)
of Hoshizaki
Scale Away
into the water
tank. Replace the front insulation panel. Turn the
cleaning valve
left
until completely vertical (open).
NOTICE! AVOID EXCESSIVE FOAMING,
wait 1
minute before next step.
Move the control switch to
WASH
, replace
Front Panel
.
NOTICE! DO NOT
leave the control switch on WASH for extended periods when
water tank is empty. It will damage water pump seals.
Ice Machine
KMD-850MAH, MWH, MRH
KMD-901MAH, MWH, MRH
OPEN
3
min.
3
min
3
min.
Cleaning & Sanitizing
The ice maker must be cleaned & sanitized at least once a year.
WARNING!
DO NOT
leave icemaker
unattended when panels are off
1
continued on the back…
Tech Support: 1.800.233.1940
R
A
1
A
2
R
3
R
4
Sanitizing:
x
Fill the water tank
x
CLOSE
the cleaning valve
x
Move control switch to ICE,
replace the front panel
x
After 3 minutes, remove the
front panel
x
Move control switch to OFF
x
Remove the front insulation
panel
x
Pour
.78 fl. oz (23 ml)
of
chlorine bleach* into the
water tank
x
Replace the front insulation
panel
x
OPEN
the cleaning valve
* Use bleach without additives.
Additives cause excessive foaming, and
reduces effectiveness of the cleaning.
x
Wait 1 minute to avoid
excessive foaming
x
Move control switch to WASH,
replace the front panel
x
After 45 minutes, remove
the front panel
x
Remove the front panel
x
Move the control switch to OFF
x
Remove the front insulation
panel, cube guide B & A,
overflow cap & pipe, water
shield, and drain plug
x
After the water tank has
drained, replace all items
14
n
15
16
17
R
5
R
(
6
M
7
Front View of Ice Maker
#51004 | 7.22.2016
AMMONIA
Cleaners
n
18
Page 10
