Move the control switch to
WASH
, replace
Front
Panel
.
NOTICE! DO NOT
leave the control switch on WASH
for extended periods when water tank is empty. It will
damage water pump seals.
After
30 minutes
, remove
Front Panel
, then move the
control switch to
OFF
.
Remove the
Top
,
Left
, and
Insulation Panels
. Remove the
Distributor Hose
.
Remove the
Thumbscrew
securing
Cube Guide B
, then remove both
Cube Guides
B & A
.
Remove the
Overflow Cap
,
Overflow Pipe
, and
Drain Plug
. Clean all items (See
Step 12). Once water tank has drained, replace and reconnect all the items.
In bad water conditions, a more thorough cleaning
may be required. Turn off power supply, clean all items
in a solution of
5 oz. of Scale Away per gallon of
warm water
. Rinse and replace the cube guides, float
switch, water supply tubes, spray tubes and spray
guides. Turn on power supply. Otherwise, continue to
step
༚
.
Cleaning Rinse:
Turn the cleaning valve to the
right
until completely
horizontal (closed). Move the control switch to
ICE
,
replace
Front Panel
. After
3 minutes
, remove the
Front Panel
, move switch to
OFF
.
NOTICE! ICE MACHINE WILL NOT WORK,
unless valve is completely closed.
Turn the cleaning valve to the
left
until completely
vertical (open). Move the control switch to
WASH
,
replace the
Front Panel
. After
5 minutes
, remove
the
Front Panel
, switch to
OFF
.
Remove the
Top
,
Left
, and
Insulation Panels
.
Remove the
Distributor Hose
. Remove the
thumbscrew
securing
Cube Guide B
, then
remove both
Cube Guides B & A
.
Remove the
Overflow Cap
,
Overflow Pipe
, and
Drain Plug
. Once water tank has
drained, replace and reconnect all the items. Continue to
Sanitation – Step
༞
on
front
...
Tech Support: 1.800.233.1940
CLOSE
CONTROL PANEL
ICE
>
3 minutes
>
OFF
OPEN
30
min.
#51000 | 7.21.2016
!
sanitizing continued…
RINSE 1:
(Steps 23-26)
x
CLOSE
cleaning valve
x
Move control switch to ICE,
replace the front panel
x
After 3 minutes, remove the
front panel
x
Move control switch to OFF
x
OPEN
cleaning valve
x
Move control switch to WASH,
replace the front panel
x
After 5 minutes, remove the
front panel
x
Move control switch to OFF
x
Remove the top, left, and
insulation panels
x
Remove distribution hose
x
Remove thumbscrew from cube
guide B
x
Remove cube guide B & A
x
Remove the overflow cap,
overflow pipe, and drain plug
x
After the water tank has
drained, replace and reconnect
all the items
.
RINSE 2 & 3:
(Steps 27-34)
x
Repeat 2x (Steps 23–26) for
complete ice/food safety
x
Clean the dispenser /
storage bin liner with a
neutral cleaner (dish soap)
x
Rinse thoroughly
x
CLOSE
the cleaning valve
x
Move control switch to ICE
x
Replace all panels
CONTROL PANEL
WASH
>
5 minutes
>
OFF
DOWNLOAD COMPLETE
INSTRUCTION MANUAL:
hoshizakiamerica.com/support
Type in the model number of your
ice machine (including dashes) to
download manuals
OPEN cleaning valve:
x
To allow cleaning solution flow to
the inside the evaporator
x
Turn left to open (vertical)
CLOSE cleaning valve:
x
Must be closed for normal ice
making operation
x
Turn right to close (horizontal)
NOTICE!
IF ICE MAKER IS ON DISPENSER,
remember to turn on the dispenser
after cleaning
WARNING!
DO NOT
use
ammonia type
cleaners. Can cause
damage to icemaker
WEAR
liquid-proof
gloves and goggles to
protect skin & eyes
from cleaning &
sanitizing chemicals
භ
Scoop
භ
Water Filters
භ
Exterior
භ
Bin Door/Top Kit
භ
Ice Maker/Bin
භ
Water Supply Inlet
භ
Condenser
භ
Water Hoses
Dish soap, rinse well
Check psi, change if req’d
Dish soap & damp cloth
Warm water & clean cloth
Follow these instructions
Clean inlet screen
Inspect. Clean with brush
Inspect. Replace if req’d
භ
භ
භ
M
P
8
A
c
9
R
R
10
R
S
11
I
12
T
13
2
23
T
14
2
R
R
15
2
R
16
24
25
26
27
35
36
37
AMMONIA
Cleaners
Need Service or Repair? Locate your closest Hoshizaki Certified Service Tech: hoshizakiamerica.com/locate-service-rep
Page 19
