Maintenance location
Work instructions
Interval
Coulter
Rubber mounting
Check condition and replace if aged or showing reduced
tensioning force.
40 h
Coulter discs
Check state, wear, bearing play and light movement. The
discs must be rotatable by hand.
40 h
Press rollers
Check for condition, firm seating and wear.
daily
Scrapers on coulters and press rollers
Check condition, setting and state of wear.
daily
Harrow
Check condition, tightness, setting and state of wear.
daily
Metering unit for micro-granulate
Hopper, distributor and metering unit
Remove residues and clean.
daily
Distributor tower for micro granulate
Check distributor and hoses for damage and blockage,
clean the distributor.
daily
Filling auger
Complete filling auger
Cleaning the filling auger. Move the auger to the transport
position for cleaning.
daily
Auger bearing
Lubricating the bottom auger bearing.
40 h
Wheels/brakes
Wheels
Check for damage (cracks, etc.).
daily
Check fastening/retighten wheel nuts - see above.
see above
Check air pressure
• 550/45-22.5: 2.8 bar
• 600/55-26.5: 2.6 bar
• 710/50-26.5: 2.6 bar
• 10.0/75-15.3: 7.1 bar
• 15.0/75-15.3: 7.1 bar
daily
Bearings of carrying axle journals
Check clearance and adjust if necessary (must only be
carried out by an expert workshop).
120 h/
6 months
NOTES:
•
The maintenance interval
daily
designates maintenance on each working day before working with the machine.
•
Follow additional maintenance notes in the respective chapters.
81
Summary of Contents for Pronto 6 NT
