¾
Loosen the transport lock on the hose:
Folding/transport position
¾
Hook a vessel on the lower folding joint to
collect residual quantities:
¾
Hook the carbine onto the house for a trans-
port lock.
¾
Move the lever on the platform to the left and
hold it until the auger is fully folded:
¾
Close the hopper lid.
Filling
NOTE
¾
Do not overspeed the filling auger (max.
375 rpm at an oil flow rate of approx. 60 l/min).
¾
Switch on the hydraulic drive on the tractor.
¾
Run the tractor with raised engine speed.
1
2
¾
Switch on the hydraulic motor with one of the
two rotary valves (1) and (2).
The rotary valves are connected with each
other via two-way switching. The switches
engage and do not need to be held.
¾
Fill the hopper with seed or fertiliser. Watch
out for foreign objects.
¾
Let the auger run after somewhat and switch
it off with the rotary valve.
¾
Switch off the hydraulic drive on the tractor
and shut down the engine.
Care and maintenance
¾
Thoroughly clean the auger, especially after
using it with dressing or fertiliser.
These agents are aggressive and promote
corrosion.
¾
Clean the filling auger every day from resi
-
dues, water and dust.
¾
Lubricate the bottom auger bearing every
week when in use.
74
75
Summary of Contents for Pronto 6 NT
