Calibration
CAUTION
Risk of crushing on the metering unit!
¾
Do not reach into the rotating metering unit.
NOTE
¾
Calibrate the machine only when lowered and
parked securely.
¾
Do not use seed with sticky dressing. This
affects the metering accuracy.
¾
Check seed and hopper for foreign objects.
¾
Depending on the seed install the rape brushes
or, for coarse seeds, the adapter frame, the
deflector plate and the wide sealing lip. Check
all side covers on the metering unit.
¾
Install the appropriate roller for the seed quan-
tity and check for true running.
¾
Check the condition and setting of the seal-
ing lip.
¾
Fill the hopper with seed. Only fill in small
amounts of fine seeds.
¾
Open the valve or covering (A) under the
metering unit.
¾
Check and clear the fall sluice and the pipes
of any dirt and seed deposits. Attach the
calibration bag or slide it in along the rails (B).
A
B
¾
Perform the calibration procedure. Follow the
operating instructions for the E-Manager.
¾
Close the flap / covering. Ensure leak tight
-
ness!
¾
Perform calibration for both metering units on
twin hopper machines.
66
MF
Summary of Contents for Pronto 6 NT
