horsch Maestro 24 SW Operating Instructions Manual Download Page 41

Page: 41 / 115

Transport position

WARNING

Danger of road accidents caused by losing the

machine or machine parts.

Lock the control units mechanically or electri-

cally, depending on the version, during trans-

port travel. Never switch them to the floating

position.

Check all interlocks before starting to drive.

Release the parking brake and check the

service brake (option).

Check whether all securing elements of the

connection are in place and set correctly.

NOTE

Make sure before driving on public roads that

the machine meets all respective applicable

national road traffic regulations.

Position
Control unit

Floating position

Locked position

Supply

hydr. functions

Fan - vacuum

Fan SOD

Position of control units during road travel

Make the following additional adjustments be-

fore road transport:

1. Connecting the machine, see section

Con-

necting.

2. Folding the machine, see section

Folding.

Switch off the E-Manager.

Summary of Contents for Maestro 24 SW




















































































































Search results

Summary of Contents for Maestro 24 SW

Reviews:

Brands by name

Popular brands

horsch Maestro 24 SW, Operating Instructions Manual

Search results

Summary of Contents for Maestro 24 SW

Reviews:

Brands by name

Popular brands