5. For fan with PTO-shaft drive:
- Plug the PTO-shaft pump on the PTO-
shaft journal of the tractor.
- Secure the PTO-shaft pump with the
bracket against twisting, see chapter
Pneumatics
.
6. Connect lighting and ISOBUS.
7. Turn the support upward and secure it with
bolt and cotter pin.
8. Check before starting to drive whether the
machine has been properly connected and
secured.
Transport position
WARNING
Danger of road accidents caused by losing the
machine or machine parts.
¾
Lock the control units mechanically or elec-
trically, depending on the version, during
transport travel. Never switch them to the
floating position.
¾
Check all interlocks before starting to drive.
¾
Check whether all securing elements of the
connection are in place as set correctly.
¾
Check components of the connection for
wear.
Position
Control unit
Floating position
Locked position
Supply
Fan
Tools
Bout marker
Three-point hydraulics
Position of the control units during road travel
NOTE
¾
Make sure before driving on public roads that
the machine meets all respective applicable
road traffic regulations.
Make the following additional adjustments be-
fore road transport:
1. Lift the machine.
2. Fold up the bout markers.
3. Fold up the access steps.
4.
Switch off the E-Manager.
33
