horsch 420016020001, Owner'S Manual

Page: 50 / 84

50 Omnis FT Owner’s Manual – Ver. 2.0 06/2020
www.horsch.com
HO R SCH
In Operation
•
Check the area around the machine (for children!) before setting off and starting operation of the
machine. Ensure sufficient visibility!
•
Stay clear of the operating range of hydraulically operated parts.
•
Passengers are not allowed to ride on the machine during operation!
Transport/Installation
There is higher danger of accident during initial installation. Please pay attention to the notes in the
corresponding chapters.
Delivery
The machine with implements is normally delivered completely assembled on a low loader.
If parts or modules had to be disassembled for transportation purposes, these will be assembled by our
distributor.
Depending on the design of the low loader the machine can be unloaded with a tractor or needs to lift off
with suitable lifting gear (forklift truck or crane).
Sufficient load bearing capacity of lifting gear and lifting tackle must therefore be assured.
Lifting and latching points are identified by labels.
When using other lifting points pay careful attention to the center of gravity and the weight distribution.
These points must, in any case, only be on the frame of the machine.
Installation
Instruction of the operation and initial installation of the machine will be carried out by our service
representatives or distributors.
Any use of the machine without dealer/distributor training is prohibited!
The machine can only be released for operation after the instructional session has been conducted by
our service engineer / distributor and after the operating instructions have been reviewed and read.
There is higher danger of accident during installation and maintenance. Before performing
any installation and maintenance work or service, make yourself familiar with the machine
and read the operating instructions.
Depending on scope of equipment:
•
Take loosely delivered parts off the machine.
• Check all important screw connections!
• Lubricate all grease fittings!
• Check air pressure in tires!
• Check all hydraulic connections and hoses for correct fastening
and function.
• Immediately rectify any occurring damage or have it corrected by
an authorized dealer!