CH. 3
14 MAY 2002
PAGE 15
MAN0484-01
d. The following screen appears: Two tabs are available for selection:
Figure 3.4 – Module Configuration
I/O Map Tab
NOTE: Ignore this screen at this point.
%AI registers can be varied during configuration; they are not
fixed. As a result, a more complete I/O Map is provided later on in the configuration process
after adding and deleting %AI as required.
Module Setup Tab
The
Module Setup
screen has two important functions.
Figure 3.5 – Module Setup Tab
Function 1:
Pressing the
Module Setup
tab displays a screen with a
Configure
button.
Pressing the
Configure
button opens the following
Configurator
screen.
Function 2:
After you finish with the
Configurator,
be sure to return to this screen and
press
OK
(or
CANCEL
) to save (or cancel) all changes..
