PAGE 14
14 MAY 2002
CH. 3
MAN0484-01
Figure 3.2 – Select the Comm tab
b. Next, double-click on the empty slot in which the JCM200 module will reside, or click on the
Config
button to the right of the slot position. This invokes the Add I/O Module screen. Click on the
Comm
tab.
From that dialog, select the
JCM200
module, and click
OK
.
Figure 3.3 – JCM200 Module is Added
c. The screen returns to the Configure I/O dialog box - with the selected slot showing that the
JCM200
module has been added.
Double-click on the JCM200 module in the I/O configuration screen (Figure 3.3) or click on the
Config
button next to the JCM200 module.
