Horizon Fitness Evolve Plus, Owner'S Manual

Page: 17 / 33

16
POSITIONING PEDOMETER
WIRELESS PEDOMETER INSTRUCTIONS
TO COUNT YOUR STEPS
TO TRANSMIT YOUR STEPS
TRANSMIT STEP COUNT
• Hold for 2 seconds while “Upload Steps” is scrolling.
NOTE: Transmission can take up to 15 seconds.
The pedometer may transmit in either step count mode or
accumulated time mode.
NOTE: Step count can be loaded at any time before or after
START
is pressed.
POWER ON/DISPLAY STEP COUNT:
• Press
.
• Displays step count accumulated since the
unit was last reset.
DISPLAY ACCUMULATED TIME
• Press again.
• Displays time accumulated since the
unit was last reset.
• Shown as hours-minutes
RETURN TO STEP COUNT
• The display will automatically return to step count after 5 seconds.
RESET STEP COUNT AND ACCUMULATED TIME
• Hold for 2 seconds.
Attach the pedometer to your belt, skirt, waistline, etc,
with the clip located on the back of the pedometer. Do
NOT place the pedometer in line with the center of your
body. Instead position the pedometer to the left or right
of the center of your body to ensure proper step count
during your workout. Be sure to attach the pedometer
horizontally and securely enough that it will not
become dislodged during workout.
• The display will read, “Send” while the transmission takes place.
• The step count will automatically update during the workout.
• The program will end when the step count goal is reached.