Horizon Fitness Bookletmaker FC-200A, Manual, Page: 29 / 218

21
1
Screen Descriptions /
M
a
chine Descr
iption
1-3 Screen Descriptions
21102
10305A1
21102
10305B1
21102
10305C1
21102
10305D1
21102
10305E1
Operation Screen
= Only manual feeding
= Using the HMU (Hand Marry Unit on the collator)
= Feeding starts from the collator after sheets are loaded
into the manual feed section.
= Feeding the sheets manually to match the feed
from the collator.
= When feeding the sheet manually under the sheets fed
from the collator.
This button is available only if the SPF-200A/200L
is operated using the pXnet system.
Jog Button
Press once to jog
the sheets using
the guides. Press
again to deactivate
jogging.
This mode is used to reduce power con-
sumption when the machine will not be
operated for a long time.
This button is used to do the
test binding step by step.
When this button is pressed,
the Binding-Fine Adjust screen
is displayed and one sheet is
transported to the jog section.
Status Indication Screen
After you press the button for the
setting to be changed, the Binding-
Status Setting screen is displayed.
Return to the Operation screen.
pXnet Screen
The total binding count and the num-
bers of the remaining sets at starting
or restarting are displayed.
Enter the number if you are changing
the operator.
Press this button to pause the
current job and start another job.
Press this button when the job is
complete.
Place a sheet which is the same size
as the current setting under the
stitcher head, and press
.
The sheet will be stitched the preset
number of times.
Available Range:3 to 30
Power Saving Mode
Confirmation Screen
The touch panel turns off and the machine enters
the power saving mode. When you touch the
screen, the Setting screen is displayed, and the
machine returns from the power saving mode. Do
a changeover.
When the machine returns from the power
saving mode, changeover is required. Save
the job before entering the power saving
mode.
Error screen is displayed.
One booklet
is produced
as a test.
Stitching Test Screen
One booklet is
produced with-
out trimming as
a test.
Enter the number of faulty sets.
The job name is displayed.
1-3-6
Binding-Operation Screen