Horizon Fitness Bookletmaker FC-200A, Manual, Page: 150 / 218

142
7-2 Installing the Fore-edge Trim Section
5
Remove the locking parts on the
fore-edge trim section.
6
Attach the leveling bolts.
1. Remove the front cover.
2. 1 long and 2 short leveling bolts are
included. Attach the long one to the side of
the SPF main unit.
7
Place a mounting plate under each
leveling bolt.
8
Turn the three leveling bolts and
lift the fore-edge trim section up to
the correct level.
- Check that all the casters are raised above
the floor. If there is no clearance, raise the
SPF main unit and then raise the fore-edge
trim section.
- After making the adjustment, lock each bolt
using the lock nut.
- If the SPF-200L has a torsion of frame,
make the following adjustments to correct.
11119
70101H1
Locking
parts
11119
70201E1
Leveling Bolt
(Short)
Mounting
Plate
(Small)
Mounting
Plate
(Large)
Leveling Bolt
(Long)
Front Cover
11119
70201F2
These leveling bolts are
attached on the SPF-
200L only.
Align here.
Frame of FC
Frame of SPF
(Top View)
Place a mounting plate under either front or rear
leveling bolt. Turn the leveling bolt and lift the SPF-
200L until the torsion is eliminated.
11119
70201F1
Lock Nut
Match the heights