Horizon Fitness Bookletmaker FC-200A, Manual

Page: 136 / 218

128
6-6 Replacing the Fore-edge Trim Knife
8
Lower the upper knife.
- Press the Trim Knife Reverse Jog button
and lower the upper knife as low as possi-
ble.
9
Lock the lower knife while lightly
pressing against the upper knife.
1. Loosen the mounting screws for the lower
knife at both ends with an Allen wrench.
2. Lightly press the lower knife against the
upper knife.
3. Lightly tighten the mounting screws at both
ends.
10
Set the adjuster bolts against the
lower knife.
- Stop when the adjuster bolts are just touch-
ing the knife.
11
Place a piece of paper under the
upper knife.
- Press the Trim Knife Reverse Jog button,
return the upper knife to the highest point
and then place a sheet under the upper
knife.
12
Move the upper knife through one
cycle by pressing the Jog button
and check whether the sheet is
trimmed.
- Go to step 14 if the sheet is trimmed.
- Go to step 13 if the sheet is not trimmed.
21102
60602E1
21102
60602F1
Lower Knife
Adjuster Bolt
Trim Knife Reverse
Jog Button
21102
60602G1
Locking Nut
Adjuster Bolt
6-6-2
Lower Knife Replacement