Horizon Fitness Bookletmaker FC-200A, Manual, Page: 143 / 218

135
S
titcher Head Remova
l / Att
achment /
Ma
intena
nce
6
6-9 Stitcher Head Removal / Attachment
12
Remove the stitcher head cover on
the operator side.
- The cover can be removed by removing one
mounting screw.
13
Move the stitcher head outward.
- Rotate the timing pulley by hand so that the
tip of the detection bar is next to the proxim-
ity sensor shown in the figure to the right.
14
Check that there is a gap of about
1 mm (0.04") between the screw
head and the proximity sensor.
- If the gap is not correct, loosen the block
locking screw and adjust the angle of the
block.
11119
60902E1
Timing Pulley
ñÒ1mm
11119
60902F1
11119
60902G1
11119
60902H1
Proximity Sensor
Detec-
tion Bar
- When adjusting the detection bar,
move the bar away from the proximity
sensor to prevent the screw head
from hitting the sensor.
- Check that the screw head does not
hit the sensor.
WARNING
11119
60902I1
About 1 mm (0.04”)
Screw
Head
Block Lock-
ing Screw
Fulcrum
Sensor
6-9-2