13
Electrolyte Circulation System
7145240031 V1.1 (01.2013)
Step 3: Mount the pump- and control unit
The pump- and control unit shall be mounted on a wall above the battery system. This avoids that under no
circumstances electrolyte liquid can be pushed towards the pump system. The housing should be located close
to the battery connection terminals (+/-). This is typically the end which is connected to the battery charging
device (refer also to Figure 12).
Note:
The maximum distance between the pump- and control unit and the battery is determined by the length
of the remaining (soft) air tube, the cable length of the current sensor and the cable length of the power supply
cable (refer also to Figure 4). This distance is about 3m max.
Figure 12: Installation of pump- and control unit
Summary of Contents for Electrolyte Circulation System
Page 1: ...Electrolyte Circulation System Installation and Operating Instructions...
Page 25: ...25 Electrolyte Circulation System 7145240031 V1 1 01 2013 Notizen...
Page 26: ...26 Electrolyte Circulation System 7145240031 V1 1 01 2013 Notizen...
Page 27: ...27 Electrolyte Circulation System 7145240031 V1 1 01 2013 Notizen...