Honeywell UltraKey Lite HJC5000, Installation And User Manual, Page: 44 / 72

44
Installing UltraKey Lite with VideoBloX
2. Under Serial Port1 Settings , select the following from each drop-down list as
required:
• Baud Rate : 1200, 9600, 19200 or 57600 bps.
The default for VideoBloX is 19200.
• Parity : none
• Stop Bits : 1 bit
• Data Bits : 8 bits
• Serial Mode : RS422
3. Click Apply to save the configuration, Cancel to exit without saving, or Default to
restore all factory default values.
Figure 3-11 Serial Port Configuration Tab
Step 3B: Configure the Controller for an Ethernet Connection
1. From the side menu, click IP Configuration . See Figure 3-12 .
2. In each of the fields, enter IP address , subnet mask , gateway and DNS values.
3. Click Apply to save the configuration, Cancel to exit without saving, or Default to
restore all factory default values.
Figure 3-12 IP Configuration Tab