manualshive.com logo in svg

Honeywell UltraKey Lite HJC5000, Installation And User Manual, Page: 40 / 72

Share
Download
Honeywell UltraKey Lite HJC5000 Installation And User Manual Download Page 40

40

Installing UltraKey Lite with VideoBloX

2.

When you are at the Network: Manual Setting menu, press 

Ent

, then press the LCD 

up/down arrow keys to set the UltraKeyLite network parameters (IP address, gateway, 
netmask and DNS).

3.

Press the LCD up/down arrow keys to scroll through the 
menu options to select 

IP Address

, then press 

Ent 

to 

select.

a.

Using the numeric key pad, enter an IP address, then 
press 

Ent

 to save.

The LCD menu displays the message: 

IPAddr 

Changed

. 

b.

Press the up/down arrow keys to select 

Yes

 to save or 

No

 to cancel, then press 

Ent

.

Note

 In this field, you are setting the UltraKey Lite IP address. To set the VideoBloX 
IP address (for communication purposes), see 

Step 3: Set and Configure for 

an Ethernet Connection

.

4.

Press the

 

LCD up/down arrow keys

 

to scroll through the menu options and select 

Gateway

. Press 

Ent

.

a.

Using the number keys, enter a Gateway as required, then press 

Ent 

to save.

The LCD menu displays the message:

 GW Changed

. 

b.

Press the up/down arrow keys to select 

Yes

 to save or 

No

 to cancel, then press 

Ent

.

5.

Press the

 

LCD up/down arrow keys

 

to scroll through the menu options and select 

NetMask

. Press 

Ent

.

a.

Using the number keys, enter a NetMask as required, then press 

Ent 

to save.

The LCD menu displays the message:

 NetMsk Changed

. 

b.

Press the up/down arrow keys to select 

Yes

 to save or 

No

 to cancel, then press 

Ent

.

6.

Press the

 

LCD up/down arrow keys

 

to scroll through the menu options and select

 

DNS

. Press 

Ent

. 

a.

Using the number keys, enter a DNS as required, then press 

Ent 

to save.

The LCD menu displays the message:

 DNS Changed

. 

b.

Press the up/down arrow keys to select 

Yes

 to save or 

No

 to cancel, then press 

Ent 

to save.

Network:
IP Address

IP Address
159.099.251.230

IP Addr Changed
Yes

Summary of Contents for UltraKey Lite HJC5000









































































Reviews:

No comments