Commissioning
MAN0984_Iss 4_01/19
Touchpoint Plus
Pt. No. 3011M5001
54
Technical Handbook
6.3
Logging In/Out
Access to some functions and system settings is controlled by password security. On a new system the default
password for all levels is TPPL but they should all be changed on first access, especially if the customer has elected
to have Networked access (see below for instructions).
6.3.1
How to Log In
1)
To log in, touch the user icon to open the login dialog.
2)
Touch your chosen Operator / Service / Administrator icon.
3)
Touch the password box.
4)
Enter the correct password using the touch screen keyboard. (Toggle the [
↓↑
] key for upper / lower case letters,
and the [?123] key for symbols.
5)
Touch [Finish].
6)
Touch [Log In].
7)
Use the Menu Icon to select further options.
8)
[Log Out] when finished.
6.3.2
How to Log Out
Touch the logged-in user icon and then touch [Log Out].
Note
: Periods of inactivity will lead to automatic log out; if you were in the middle of calibrating the touch screen you
must return and finish the calibration before you can proceed any further.
6.3.3
Password Rules
Note:
Administrator level access is required to create or amend an Administrator or lower levels of password. Service
level access can create or amend Service or lower levels of password. Operators can only change their own password.
The following rules apply:
•
There are three password protected levels and one non-protected level.
•
Passwords are case sensitive and cannot be recovered, but they can be reset by a higher level user.*
•
Passwords must be at least 8 characters long.
•
Passwords must contain a mix of letters, numbers and symbols.
•
Passwords must contain upper and lower case characters.
•
Passwords must be easy to remember but hard to guess.
•
Passwords may be written down, but only if they are kept secure (e.g. in a sealed envelope in a locked safe or
encrypted on other hardware [256AES or higher]).
* Lost Admin passwords can only be reset by authorised Honeywell Field Service Technicians. See the back page or
select
TPPL Menu>Information>Service Contact
for details.
