MAN0984_Iss 4_01/19
Touchpoint Plus
Pt. No. 3011M5001
19
Technical Handbook
2.3.5
Product Compliance
This product complies with the following standards and directives.
Other safety directives may
equipment or machinery.
Safety
Compliance
Hazardous Location
(Non-Incendive)
Class 1, Division 2, Groups A,B,C,D, Temp. Code T4
ISA 12.12.01-2013
CSA C22.2 No. 213-M1987
Electrical Safety
CAN/CSA C22.2 No. 61010-1 and No.142
UL 61010 1 (3
rd
Edition); UL508
IEC/EN 61010 1 (3
rd
Edition)
EMC/RFI
EN 50270
Low Voltage Directive
IEC/EN 61010 1 (3
rd
Edition)
Gas Performance*
ISA 12.13.01 and CSA C22.2 No. 152
EN 60079-29-1, EN 50104, EN 45544-1/2/3 and
EN 50271
* ISA 12.13.01 and CSA C22.2 No.152 approvals are applicable only to mV sensors Model 705 and MPD or any
suitably certified mA sensor.
* EN 60079-29-1 approval is only valid for operation with Sensepoint, Sensepoint HT, Sensepoint ppm and a certified
4-20 mA transmitter.
Note:
The Equipment referred to in this manual contains components and assemblies that are each certified for use
equipment prior to its installation and use.
Check the product rating plate and look for the following marks to ensure that the supplied equipment is suitable
for its intended location and purpose:
Products bearing the CE mark conform to all applicable European Directives as stated on the Honeywell product
specific EC Declaration of Conformity.
Products bearing the UL mark conform to the requirements for Ordinary Locations. The letters C and US mean that
the product is certified for use in Canada and the United States of America.
Conditions of Use
This Touchpoint Plus equipment shall only be operated:
•
By properly trained personnel.
•
Under Honeywell approved conditions.
•
With due authorisation.
•
Using approved maintenance and servicing procedures.
IMPORTANT
Read and understand the instruction manual before operating or servicing the equipment.
