MAN0984_Iss 4_01/19
Touchpoint Plus
Pt. No. 3011M5001
3
Technical Handbook
Conditions of Use
Disclaimer
In no event shall Honeywell be liable for any damages or injury of any nature or kind, no matter how caused, that arise
from the use of the equipment referred to in this manual.
Strict compliance with the safety procedures set out and referred to in this manual, and extreme care in the use of the
equipment, are essential to avoid or minimise the chance of personal injury or damage to the equipment.
The information, figures, illustrations, tables, specifications, and schematics contained in this manual are believed to
be correct and accurate as at the date of publication or revision. However, no representation or warranty with respect
to such correctness or accuracy is given or implied and Honeywell will not, under any circumstances, be liable to any
person or corporation for any loss or damages incurred in connection with the use of this manual.
The information, figures, illustrations, tables, specifications, and schematics contained in this manual are subject to
change without notice.
Unauthorised modifications to the gas detection system or its installation are not permitted, as these may give rise to
unacceptable health and safety hazards.
Any software forming part of this equipment should be used only for the purposes for which Honeywell supplied it.
The user shall undertake no changes, modifications, conversions, translations into another computer language, or
copies (except for a necessary backup copy).
In no event shall Honeywell be liable for any equipment malfunction or damages whatsoever, including (without
limitation) incidental, direct, indirect, special, and consequential damages, damages for loss of business profits,
business interruption, loss of business information, or other pecuniary loss, resulting from any violation of the above
prohibitions.
Warranty
Honeywell Analytics warrants the Touchpoint Plus system against defective parts and workmanship, and will repair or
(at its discretion) replace any components that are or may become defective under proper usage within 12 months
from the date of commissioning by a Honeywell Analytics approved representative* or 18 months from shipment from
Honeywell Analytics, whichever is sooner.
This warranty does not cover consumable, batteries, fuses, normal wear and tear, or damage caused by accident,
abuse, improper installation, unauthorized use, modification or repair, ambient environment, poisons, contaminants
or abnormal operating conditions.
This warranty does not apply to sensors or components that are covered under separate warranties, or to any 3
rd
-party
cables and components.
Any claim under the Honeywell Analytics Product Warranty must be made within the warranty period and as soon as
reasonably practicable after a defect is discovered. Please contact your local Honeywell Analytics Service
representative to register your claim.
This is a summary. For full warranty terms please refer to the Honeywell
General Statement of Limited
Product Warranty, which is available on request.
* A Honeywell Analytics approved representative is a qualified person trained or employed by Honeywell Analytics, or a
qualified person trained in accordance with this manual.
Copyright Notice
Microsoft, MS and MS DOS are registered trademarks of Microsoft Corp.
Other brand and product names mentioned in this manual may be trademarks or registered trademarks of their
respective companies and are the sole property of their respective holders.
Honeywell is the registered trademark of Honeywell Safety and Productivity Solutions (SPS).
Touchpoint
is a registered trademark of Honeywell Analytics (HA).
Find out more at
