Honeywell Solaris 7980g, User Manual, Page: 75 / 252

Solaris 7980g User Guide 61
Discard Partial Output Sequence
If you want to discard partial sequences when the output sequence operation is
terminated before completion, scan
Discard Partial Sequence .
Default Output Sequence
Default Sequence programs the scanner to all universal values. Be certain you
want to delete or clear all formats before you read the Default Sequence symbol.
Require Output Sequence
When an output sequence is Required, all output data must conform to an edited
sequence or the scanner will not transmit the output data to the host device. When
it’s
On/Not Required , the scanner will attempt to get the output data to conform to
an edited sequence but, if it cannot, the scanner transmits all output data to the
host device as is, or formatted according to the partial sequence output format
(see
Partial Sequence on page 59).
When the output sequence is Off , the bar code data is output to the host as the
scanner decodes it. Default = Off.
Note: This selection is unavailable when the Multiple Symbols Selection is turned on.
* Discard Partial Sequence
Default Sequence
Required
On/Not Required
*Off