54
Solaris 7980g User Guide
a good read. If you scan
Do Not End Character Activation After Good Read
, the
LED remains on after a good read.
Default = End Character Activation After Good
Read.
Character Activation LED Timeout
You can set a timeout for the length of time the LED remains on and attempting to
decode bar codes when using Character Activation Mode. Set the length (in milli-
seconds) for a timeout by scanning the following bar code, then setting the timeout
(from 1-65535 milliseconds) by scanning digits from the
then scanning
Save
.
Default = 5000 ms.
Character Deactivation Mode
If you have sent a character from the host to trigger the scanner to begin scanning,
you can also send a deactivation character to stop scanning. Scan the following
On
bar code to use character deactivation, then use
the character you will send from the host to terminate scanning.
Default = Off.
Do Not End Character
Activation After Good Read
* End Character Activation
After Good Read
Character Activation LED
Timeout
* Off
On
Summary of Contents for Solaris 7980g
