Honeywell Solaris 7980g, User Manual, Page: 73 / 252

Solaris 7980g User Guide 59
Enter Output Sequence
If you are using bar codes to create your output sequence, scan Enter Output
Sequence to begin scanning your string.
Partial Sequence
If an output sequence operation is terminated before all your output sequence cri-
teria are met, the bar code data acquired to that point is a “partial sequence.” You
can define how partial sequences are output using the same types of command
strings you used to create output sequences.
Partial Sequence Example - Three Symbologies with <> Separators, but with a
Damaged Code
In this example, you are scanning PDF417, Code 128, and Code 39 bar codes, and
you want the scanner to output Code 39 first, Code 128 second, and PDF417 third,
in brackets, as shown below, but the Code 39 bar code has been damaged and can-
not be output.
You would use the same command line as shown in Output Sequence Example 2 -
Three Symbologies with <> Separators (page 57):
SEQBLK sequence editor start command
62 code identifier for Code 39
9999 code length that must match for Code 39, 9999 = all
lengths
43 start character match for Code 39, 43h = "C"
FF termination string for first code
6A code identifier for Code 128
9999 code length that must match for Code 128, 9999 = all
lengths
Enter Output Sequence