Honeywell Solaris 7980g, User Manual, Page: 102 / 252

88 Solaris 7980g User Guide
mat is not transmitted, and no error tone will sound. If you wish to hear the error
tone when a non-matching bar code is found, scan the
Data Format Non-Match
Error Tone On bar code. Default = Data Format Non-Match Error Tone On .
Primary/Alternate Data Formats
You can save up to four data formats, and switch between these formats. Your pri-
mary data format is saved under 0. Your other three formats are saved under
1 , 2 ,
and 3 . To set your device to use one of these formats, scan one of the bar codes
below.
Single Scan Data Format Change
You can also switch between data formats for a single scan. The next bar code is
scanned using an alternate data format, then reverts to the format you have
selected above (either Primary, 1, 2, or 3).
* Data Format Non-Match Error
Tone On
Data Format Non-Match
Error Tone Off
Primary Data Format
Data Format 1
Data Format 2
Data Format 3