manualshive.com logo in svg

Honeywell Solaris 7980g, User Manual, Page: 13 / 252

Share
Download
Honeywell Solaris 7980g User Manual Download Page 13

Solaris 7980g User Guide

xi

Customer Support

Technical Assistance

If you need assistance installing or troubleshooting your device, please contact us 
by using one of the methods below:

Knowledge Base: 

www.hsmknowledgebase.com

Our Knowledge Base provides thousands of immediate solutions. If the Knowledge 
Base cannot help, our Technical Support Portal (see below) provides an easy way to 
report your problem or ask your question.

Technical Support Portal: 

www.hsmsupportportal.com

The Technical Support Portal not only allows you to report your problem, but it also 
provides immediate solutions to your technical issues by searching our Knowledge 
Base. With the Portal, you can submit and track your questions online and send 
and receive attachments. 

Web form: 

www.hsmcontactsupport.com

You can contact our technical support team directly by filling out our online sup-
port form. Enter your contact details and the description of the question/problem.

Telephone: 

www.honeywellaidc.com/locations

For our latest contact information, please check our website at the link above.

Product Service and Repair

Honeywell International Inc. provides service for all of its products through service 
centers throughout the world. To obtain warranty or non-warranty service, please 
visit

 www.honeywellaidc.com 

and select Support > Contact Service and Repair to 

see your region's instructions on how to obtain a Return Material Authorization 
number (RMA #). You should do this prior to returning the product.

Limited Warranty

Refer to 

www.honeywellaidc.com/warranty_information

 for your product’s war-

ranty information.

Summary of Contents for Solaris 7980g





























































































































































































































































Reviews:

No comments