Honeywell Sensepoint XCD RTD, Technical Manual

Page: 41 / 68

Sensepoint XCD RTD Technical Manual SPXCDHMRTEN Issue 1
41
Set Calibration
Select Gas
Set Range
Configure Inhibit
Set Password
Set Calibration Interval
Bump Test
Force Current
Set Alarms
Set Relays
Relay Operation
Execute zero/span calibration
Set calibration gas level
After zero, the option exists to proceed with
span calibration, or return to the Menu.
Select the type of gas from the list.
Set measuring range
Select inhibit current
Set timeout option (5 minute increments)
Enable/disable password
Set password
Default – no password (Select ‘0000’)
Set calibration interval, 30 to 365 days
User configurable option to display warning
Execute a ‘bump’ test to check gas
response of the sensor.
Force analogue output to test functionality
of GD control system during system
commissioning.
Set alarm 1, alarm 2 levels, functionality
and operation (none/falling/rising)
Set relay 1,2,3 type (alarm 1, alarm 2,
fault and inhibit) and action (energized/de-
energized)
Configure relay on delay time, relay off
delay time and latch/non-latch
Menu Display Description