Honeywell Rapid Eye Installation Manual Download Page 5

Page: 5 / 82

Rapid Eye™ Multi-Media DVR Installation Guide

Document 800-02607V3 Rev A

11/09

About This Document

This document introduces the Rapid Eye™ Multi-Media Digital Video Recorder. It covers
how to install and prepare the Rapid Eye Multi-Media Digital Video Recorder for use.

This document is intended for installers.

Overview of Contents

This document contains the following chapters and appendixes:

•

Chapter 1, Introduction

, introduces you to your Rapid Eye unit.

•

Chapter 2, Installation

, provides procedures for installing the Rapid Eye unit, its

components, and configuring your network settings.

•

Chapter 3, Quick Test for Remote Video

, describes a quick test to confirm that all the

Rapid Eye hardware and software is working properly.

•

Chapter 4, Audio

, identifies procedures to check for audio interference and to

monitor and record audio data.

•

Chapter 5, Site Hardware

, shows how to add hardware to a Multi-Media DVR and

then use the software to configure the hardware.

•

Appendix A, Frequently Asked Questions

, reports solutions to frequently asked

questions.

•

Appendix B, Cabling

, offers cabling options and length limits.

•

Appendix C, Site Information Checklists

, presents checklists that may be useful to

the installers.

Cautions and Warnings

Summary of Contents for Rapid Eye



















































































Search results

Summary of Contents for Rapid Eye

Reviews:

Related manuals for Rapid Eye

Brands by name

Popular brands

Honeywell Rapid Eye, Installation Manual

Search results

Summary of Contents for Rapid Eye

Reviews:

Related manuals for Rapid Eye

Brands by name

Popular brands