Honeywell Rapid Eye, Installation Manual

Page: 23 / 82

Document 800-02607V3 Rev A 23
11/09
2
Installation
This chapter provides procedures for installing a Rapid Eye Multi-Media DVR system in
the field.
Before You Begin
It is important that you follow the procedures in this chapter in the order listed. Please read
this guide carefully before starting the installation. Keep this guide for future reference.
Caution This equipment is ONLY designed to be mounted and operated in a
horizontal position.
Unpack Everything
Check that the items received match those listed on the order form and packing slip. The
items you receive will depend on your unique system requirements. Your kit can include:
Table 2-1 Contents of Rapid Eye Hardware Kit 100-01205
Item
a
Part #
Power Cord P8137
Rack ears, brackets and screws, for optional DVR mounting SARE2EARS
Network CAT5 cable, RJ45 connections, 2 m length K9530
Modem cable, RJ11 CB00173
Terminal block plug for FAULT RELAY, 4 positions, 3.5 mm K9531-4
6 Terminal block plugs for ALARM inputs and CONTROL
outputs, 8 positions, 3.5 mm K9531-8
Screwdriver, slim, for terminal blocks K9536
Mouse, two-button, USB connector 100-01280