Honeywell Rapid Eye Installation Manual Download Page 12

Page: 12 / 82

Contents

Dial-up Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

DVR Internal Modem Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Testing a Dial-Up Connection in the Field . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Beeping from the DVR When an Alarm is Triggered.  . . . . . . . .  . . . . . . . . . . . . . . .  . . .   . 39
Upgrading the Software of a DVR Onsite   . . . . . . . . . . . . . .  . . . . . . . . . . . . . . .  . . . . 39
Use of Media by the DVR, for Clip Distribution. . . . . . . . . . . .  . . . . . . . . . . . . . . .  . . . . 40

Quick Test for Remote Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Software for the Remote Operation of Rapid Eye DVRs . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Checklist for Admin Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Checklist for View Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Obtaining Live Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Avoiding Installation Problems for Video. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Spot-Checking Recorded Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Calibrating Tamper Detection for Cameras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Calibrating Rows of Mobile Objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Firewall Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Audio at a Multi-Media Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Checking For Audio Interference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Audio for Operators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Sending and Receiving Audio Offsite   . . . . . . . . . . .  . . . . . . . . . . . . . . .  . . . . 49
Monitoring and Recording Audio . . . . . . . . . . . . . .  . . . . . . . . . . . . . . .  . . . . 50
Enabling Talking to a Site   . .  . . . . . . . . . . . . . . .  . . . . . . . . . . . . . . .  . . . . 50

Onsite Audio Using LocalView . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Disabling Audio for LocalView . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Site Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Securing a Multi-Media DVR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Connectors for Serial Communications on Ports 1 to 8 . . . . . . . . . . . . . . . . . . . . . 52

DVR Hard Disk and S.M.A.R.T. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Hard Disk Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Removing a Drive in the DVR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Hardware Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Public Display Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Using LocalView for Public Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Connecting a PTZ Dome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

ACUIX Camera  . . . . . . . .  . . . . . . . . . . . . . . .  . . . . . . . . . . . . . . .  . . . . 55
Many PTZ Domes on One Serial Communications Line . .  . . . . . . . . . . . . . . .  . . . . 55
Configuring PTZ   . . . . . . .  . . . . . . . . . . . . . . .  . . . . . . . . . . . . . . .  . . . . 56

Alarm Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Connecting an Alarm Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Inputs for Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Configuration Using View Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Technical Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Control Outputs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
System Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Connection to an Alarm Panel  . . . . . . . . . . . . . . .  . . . . . . . . . . . . . . .  . . .   . 60
Fault Relay Hardware . . . . .  . . . . . . . . . . . . . . .  . . . . . . . . . . . . . . .  .  . . . 60
Fault Relay Setup . . . . . . .  . . . . . . . . . . . . . . .  . . . . . . . . . . . . . . .  . . . . 61

Summary of Contents for Rapid Eye



















































































Search results

Summary of Contents for Rapid Eye

Reviews:

Related manuals for Rapid Eye

Brands by name

Popular brands

Honeywell Rapid Eye, Installation Manual

Search results

Summary of Contents for Rapid Eye

Reviews:

Related manuals for Rapid Eye

Brands by name

Popular brands