Honeywell Rapid Eye, Installation Manual

Page: 38 / 82

38
Installation
Note Connect the DVR to a telephone line only if a dial-up connection is planned.
Caution Power down the DVR before connecting hardware to it. See Powering Up
on page 29 .
For Telco communication, a data-grade (fax) telephone line is preferable to a standard line.
Special features, such as call waiting, should not be available on a telephone line used by
a Multi-Media DVR.
Note For dial-up connections, LocalView is not needed to help set up a remote
connection.
You are ready to power-up the camera(s) and the DVR. See Powering the Multi-Media DVR
on page 28 .
DVR Internal Modem Default Settings
Testing a Dial-Up Connection in the Field
Using a standard telephone line, dial the number used to reach the DVR modem, to listen
for an answer tone.
Table 2-3 Default Settings of the Internal DVR Modem
Field name Value
TELCO Port Internal or Port 1
Baud 115,200
Wait 60
Prefix AT
Initialization Z
Dialing D