manualshive.com logo in svg

Honeywell NOTIFIER SFP-10UD Series, Manual, Page: 21 / 164

Share
Download
Honeywell NOTIFIER SFP-10UD Series Manual Download Page 21

SFP-5UD & SFP-10UD Series Manual—

 P/N 52879:C2 1/24/2012  

21

Digital Alarm Communicator/Transmitter

Product Description

1.4  Digital Alarm Communicator/Transmitter

Two modular phone jacks allow easy connection to telephone lines.  Modular jacks are labeled PH1 
for Primary Phone Line and PH2 for Secondary Phone Line.  Two telephone line active red LEDs 
are provided as well as a green 

Kissoff

 LED.  The integral digital communicator provides the fol-

lowing functions:

•

Line Seizure: takes control of the phone lines disconnecting any premises phones

•

Off/On Hook: performs on and off-hook status to the phone lines

•

Listen for dial tone: 440 Hz tone typical in most networks

•

Dialing the Central Station(s) number: default is Touch-Tone

®

, programmable to rotary

•

For tone burst or touchtone type formats: discern proper 

Ack

 and 

Kissoff

 tone(s).  The 

frequency and time duration of the tone(s) varies with the transmission format.  The control 
panel will adjust accordingly.

•

Communicate in the following formats:

Ademco Contact ID

SIA-DCS-8

SIA-DCS-20

1.5  Components

Main Circuit Board

The main circuit board contains the system’s CPU, DACT and other primary components and wir-
ing interface connectors.  Optional modules plug in and are mounted to the main circuit board. 

Power Supply

One power supply is provided standard with each FACP, mounted to a chassis. 

•

FLPS-3 for the SFP-5UD

•

FLPS-7 for the SFP-5UDC, SFP-10UD(C)/E

Cabinet

The backbox measures 16.65” (42.29 cm) x 19.0” (48.26 cm) x 5.207” (13.23 cm) and provides 
space for two batteries (up to 18 Amp Hours).  Also available are an optional dress panel (DP-
51050B (black) or DP-51050 (red)) which mounts inside the cabinet and trim-ring (TR-CE/B).  The 
Canadian version is supplied standard with a modified dress panel and one N-ANN-LED annuncia-
tor module.

Batteries

The cabinet provides space for two 18 Amp Hour batteries (larger batteries require use of a UL 
listed battery box such as the NFS-LBB or BB-26).  Batteries must be ordered separately.

1.6  Optional Modules and Accessories

N-CAC-5X Class A Converter Module

The N-CAC-5X Module can be used to convert the Style B (Class B) Initiating Device Circuits to 
Style D (Class A) and Style Y (Class B) Notification Appliance Circuits to Style Z (Class A).  The 
module connects to J2 on the SFP-5UD and SFP-10UD main circuit board and to J7 on the SFP-
10UD.  Note that two Class A Converter modules are required for the 10 zone panel.

Summary of Contents for NOTIFIER SFP-10UD Series





































































































































































Reviews:

No comments