SFP-5UD & SFP-10UD Series Manual—
P/N 52879:C2 1/24/2012
115
Supervisory Operation
Operating Instructions
•
Third line in display:
Zone 10
indicates the zone programmed to this device which, in this
example, is Input Zone 10.
•
Fourth line in display:
– Time; the current time in this example is
10:00A
which represents 10:00 AM
– Date; the current month, day and year in this example is
11
for November,
10
for the 10th
day of the month and
09
for the year 2009
4.6 Supervisory Operation
Supervisory operation is similar to alarm operation but with the following differences:
•
The piezo sounder pulses ½ second On and ½ second Off
•
The Supervisory LED flashes ½ second On and ½ second Off
•
The LCD displays the status label
Active Supervisory
along with the device name, type,
adjective/noun, associated zones and time/date
•
Communicate the supervisory condition to the Central Station
•
The supervisory relay is activated
•
The alarm relay is not activated
•
Silenced alarms are not resounded
•
Timers are not started
•
Store event in history buffer
•
Terminate upload or download communications
A typical Supervisory event would be displayed as illustrated in the following:
In the preceding example:
•
FROZEN SUPRV -
indicates zone detector is below approximately 45
o
F
Note that, like alarms, supervisory signals latch, except when programmed for supervisory autore-
settable. Supervisory activations do not cause silenced alarms to resound, as do other alarm condi-
tions. Open circuits in supervisory wiring are processed by the control panel the same way as other
trouble conditions. Refer to “Alarm Operation” on page 114, for a description of the information
displayed on the control panel LCD.
4.7 Process Monitor Operation
Process Monitor operation will initiate the following events:
•
The piezo sounder pulses ¼ second On and ¼ second Off
•
The LCD displays a process monitor message along with the device name, type,
adjective/noun, associated zones and time/date
•
Communicate the process monitor condition to the Central Station (if the default event code
has been changed from 000 to a reportable event code)
•
Relays programmed for process monitoring will be activated
FREEZE SUPERVISORY
<ADJ> <NOUN>
ZONE 05 FROZEN SUPRV
10:00A 111009