ID2000 Series Operating Manual
Appendix 1
A1 - 8
997-434-000-4, Issue 4
May 2010
PANEL STATUS:
DEVICES DISABLED
This is indicated when some or all of the sensors or
modules of the system have been disabled by means of
the disablement operation (see
Section 4.9
for details).
If the panel is a NETWORK MASTER panel this status
is shown whenever devices are disabled on the network
as a whole. For other panels it is shown only if devices
connected directly to that panel are disabled.
The DEVICES DISABLED condition continues to be
shown until superseded by a higher-priority condition or
until cleared by removing all devices from a disablement
status. If an Alarm or Fault occurs and is subsequently
cleared and RESET is pressed, then if appropriate the
panel reverts to showing the DEVICES DISABLED status.
The LCD displays the message shown below:
The indications of the panel and external equipment are
as follows:
LAMP indications:
POWER (green):
ON
DISABLEMENT (amber):
ON
SOUNDERS DISABLED (amber)
ON (if
any sounders are
disabled)
Fault buzzer:
Intermittent - one 0.5 sec pulse ON
followed by 11.5 secs OFF
Circuits Controlled Internally and
External Devices:
Programmed
function
Zonal amber lamps are ON steady when ALL input devices
in that zone are disabled.
DEVICES DISABLED
(date)
(time)
(blank) or (System Normal message)