82
NFS2-3030 Programming Manual —
P/N 52545:K1 03/20/2012
Alter Status
Walk Test
4.6.5 Zone Walk Test Activation
Figure 4.13 Zone Walk Test Selection Screen
POINT
SELECT:
Press to enter a zone number that will be put into Walk Test. When the panel
finds that zone in the first position of a device’s CBE map, that device will be put in Walk Test
mode.
START
TEST:
Press to begin Walk Test using the chosen parameters. Once Walk Test has begun,
this soft key becomes
ABORT
, and can be pressed at any time to exit Walk Test.
Walk Test In Progress Screen
Figure 4.14 Walk Test In Progress Screen
T R O U B L E
P R O G M O D E A C T I V A T E D
L A K E V I E W G E N E R A L H O S P I T A L
1 0 : 2 2 : 3 4 A T U E J A N 2 5 , 2 0 1 1
W A L K T E S T
S E T T I N G S : B A S I C , A U D I B L E , Z O N E S
P O I N T S E L E C T :
Z 0 0 1 ( Z O N E )
S T A R T T E S T
N E X T T E S T A B O R T
T R O U B L E
P R O G M O D E A C T I V A T E D
L A K E V I E W G E N E R A L H O S P I T A L
1 0 : 2 2 : 3 4 A T U E J A N 2 5 , 2 0 1 1
W A L K T E S T I N P R O G R E S S
S E T T I N G S : A D V A N C E D , A U D I B L E , P A N E L
N E X T T E S T A B O R T
Once the
START TEST
soft key has
been pressed and the test begun,
the message changes to
ABORT
Once the
START TEST
soft key has
been pressed, this soft key appears.
Appears in Advanced walk test only.
Settings will
indicate
whether it is a
Basic or
Advanced
walk test.