Honeywell N431X, User Manual

Page: 72 / 222

Next, scan the Character to Trigger Delay bar code, then the 2-digit
hex value for the ASCII character that will trigger the delay ASCII
Conversion Chart on page A-3.
Delay Length
Character to Trigger Delay
To remove this delay, scan the Delay Length bar code, and set the
number of delays to 0. Scan the Save bar code using the Programming
Chart inside the back cover of this manual.
Interfunction Delay
An interfunction delay of up to 5000 milliseconds (in 5ms increments) may
be placed between the transmission of each segment of the message
string. Scan the following Interfunction Delay bar code, then scan the
number of 5ms delays, and the Save bar code using the Programming
Chart inside the back cover of this manual.
Prefix Scanned Data Suffix
STX 1 HT 2 3 4 5 CR LF
Interfunction Delays
Interfunction Delay
To remove this delay, scan the Interfunction Delay bar code, then set
the number of delays to 0. Scan the Save bar code using the
Programming Chart inside the back cover of this manual.
4 - 8