Honeywell N431X, User Manual, Page: 128 / 222

UPC-A Addenda Required
When Required is scanned, the engine will only read UPC-A bar codes
that have addenda. You must then turn on a 2 or 5 digit addenda listed on
page 6-35 . Default = Not Required.
Required
* Not Required
Addenda Timeout
You can set a time during which the engine looks for an addenda. If an
addenda is not found within this time period, the data can be either trans-
mitted or discarded, based on the setting you are using for UPC-A
Addenda Required (see page 6-36). Set the length (in milliseconds) for
this timeout by scanning the bar code below, then setting the timeout
(from 0-65535 milliseconds) by scanning digits from the Programming
Chart , then scanning Save . Default = 100.
Note: The Addenda Timeout setting is applied to all addenda and coupon
code searches.
Addenda Timeout
UPC-A Addenda Separator
When this feature is on, there is a space between the data from the bar
code and the data from the addenda. When turned off, there is no space.
Default = Off.
On
* Off
6-36