Honeywell N431X, User Manual

Page: 117 / 222

Concatenation Timeout
When searching for bar codes during concatenation, you may wish to set
a delay used to find the next bar code. Set the length (in milliseconds) for
this delay by scanning the bar code below, then setting the timeout (from
1-65535 milliseconds) by scanning digits from the Programming Chart ,
then scanning Save . Default = 750.
Concatenation Timeout
ISBT 128 Predefined Concatenation Sequences
Note: You must enable Code 128 and ISBT 128 to use this feature.
The following bar codes are used to select the pre-defined ISBT 128 Con-
catenation Sequence you wish to use. Once you have selected the concat-
enation sequence, use ISBT 128 Predefined Concatenation Sequences On/Off
to enable this feature. Default = Donation ID Number (001)
and ABO/RhD Blood Groups (002).
* Donation ID Number (001) and
ABO/RhD Blood Groups (002)
Donation ID Number
(001) and
Donor ID Number
(019)
Donation ID Number (001) and
Confidential Unit Exclusion
Status
Product Code (003) and
Expiration Date (Form 1)
Product Code (003) and
Expiration Date (Form 2)
Product Code (003) and
Expiration Date (Form 3)
Product Code (003) and
Expiration Date (Form 4)
6-25