Honeywell Mesh Router, User Manual

Page: 50 / 71

2. Now press “Trigger Relays.” This screen is now shown:
Trigger all Relays
With “All Relays” highlighted, press [MODE] to trigger all relays simultaneously.
Trigger a Selected Relay
Scroll down the list of relays (1 through 5) by pressing [N/-]. Once you have highlighted
the individual relay you want to trigger, press [MODE]. This triggers only that one
selected relay.
Note:The relay on the TPPLW controller remains triggered until it is cleared, either at the
TPPLW or at the Mesh Router. Also, the word “ONLINE” on the Mesh Router flashes on
and off until you clear the relays.
Clear Relays
Clear relays clears all of the relays on the controller, even if only one relay was triggered.
Select “Clear Relays” and then press [MODE] to clear the relays.
Mesh Router 50 User Manual