Honeywell Mesh Router, User Manual

Page: 38 / 71

Edit Password
You can change the password by selecting “Edit Password.”
At this screen, input your new password over the old one (or the default):
l
Increase the number from 0 through 9 by pressing [Y/+].
l
Decrease the number from 9 through 0 by pressing [N/-].
l
Step from digit to digit using [MODE].
Note:If you make a mistake, you can cycle through the digits by pressing [MODE] and then
using [Y/+] and [N/-] to change the number in each position.
Once all the four digits have been entered, press [MODE] again to see the following screen
appear.
l
Save your changes by pressing [Y/+].
l
Exit without saving changes by pressing [N/-].
l
Step back to the first digit by pressing [MODE].
Mesh Router 38 User Manual