manualshive.com logo in svg

Honeywell Marathon, User Manual

Share
Download
Honeywell Marathon User Manual Download Page 175

11 - 7

Desktop Dock Help

Note: The following is intended as an aid in determining whether the extended battery or the dock spare battery charging 

bay may be malfunctioning.

Issue

Cause

Solution

Extended battery 
does not fit in spare 
battery charging bay.

Different manufacturer's extended battery, 
or there is an object in the battery well.

Check if the battery pack is part number 
FX1381BATTERY/163877-0001 (42Whr) or 
FX1382BATTERY/163878-0001 (62Whr). If not, 
do not use.
Remove the object from the battery well.

No extended battery 
in spare battery 
charging well, but the 
Spare Battery 
Charging bay LED is 
on.

Dirt or foreign objects are in the battery 
bay.

Unplug dock from AC/DC outlet. Remove any 
dirt or foreign objects from battery bay.
If the LED continues to stay ON, the dock may 
be defective. Return dock to an authorized 
service center.

Dock is plugged into 
a live outlet, 
extended battery is 
inserted, but LED is 
OFF and no other 
LEDs are on, or all 
LEDs are off.

Battery pack is not making contact with 
charging terminals in the spare battery bay.
Fully charged extended battery in spare 
battery bay.
New battery, same result.

•

Push extended battery in firmly. Do not 
"slam" the battery into the spare battery bay.

•

There is nothing wrong with the extended 
battery or spare battery charging bay.

•

New battery is fully charged.

When you first put a 
fully charged 
extended battery in 
the spare battery 
charging bay, the 
RED LED comes on, 
indicating the battery 
is charging.

During the first few minutes, the charger 
checks the extended battery for correct 
voltage and charge state. During this time 
the LED is RED and is continuously ON. 
When charging begins, the LED is 
YELLOW and is continuously ON. After 
charging is complete, the LED is OFF.

There is nothing wrong with the extended 
battery or spare battery charging pocket.

LED is flashing RED 
at any station. 

Current could not be sourced through the 
extended battery due to age, exhaustion or 
damage to the cell(s).

Or

The extended battery does not 
communicate with the charger. 

Contact 

Customer Support

 (page 14-1) for 

extended battery replacement options.

The charger’s timeout period has expired.

Make sure that the extended battery 
temperature is within specification and retry 
charging. If problem repeats, contact 

Customer 

Support

 (page 14-1) for extended battery 

replacement options.

Solid YELLOW LED 
when extended 
battery is inserted in 
the dock.

The extended battery is too hot or too cold 
to charge.

Remove extended battery from the spare 
battery charging bay and allow it to adjust to 
room temperature.
If the battery is left in the dock, it will cool down 
or warm to a temperature upon which the dock 
will begin the charge cycle. However, depending 
on the temperature of the battery, it may take 2-
3 hours to adjust. The battery can cool down 
faster if the battery is not in the battery well.

Summary of Contents for Marathon































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands