manualshive.com logo in svg

Honeywell Marathon, User Manual

Share
Download
Honeywell Marathon User Manual Download Page 165

10 - 5

While charging, the charger and battery pack will generate enough heat to feel warm. This is normal and does not indicate a 
problem.

Inserting a Battery into the Charging Pocket

Caution! It is important that battery packs are inserted into the charging pocket correctly. Inserting the battery incorrectly 
could result in damage to the battery pack or the charger.

Caution! Do not “slam” the battery pack into the charging pocket. Damage may result.

When preparing the battery pack for insertion into the battery charging pocket, hold the battery with the battery charging 
contacts in line with the charging contacts in the charging pocket.

Insert the battery into the charging pocket. As the battery charging contacts properly mate with the charging contacts in the 
pocket, the retaining clip moves in and then out, restraining the battery in the charging pocket.  

Removing the Battery from the Charging Pocket

If necessary, stabilize the charger with one hand before removing a battery from a charging pocket. Grasp the battery firmly 
and pull it straight up and out of the charging pocket.

Summary of Contents for Marathon































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands