5-28
Rev 2
(PVW) is the nearest VOR to the first Center Waypoint
location, the 00 is appended to PVW to create PVW00.
If PVW were later used in the creation of another Center
Waypoint, the second waypoint’s identifier would be
PVW01.
The second line of the CTR 2 page shows the “from”
Center followed by the “to” Center. In our example,
PVW00 lies on the boundary between Ft. Worth (FW)
and Albuquerque (ABQ) Centers. See figure 5-91. A
listing of the Center abbreviations is contained in
Appendix D.
The third and fourth lines of the CTR 2 page display the
Center Waypoint location in terms of the identifier of the
nearest VOR to the Center Waypoint and the distance
and radial from this VOR to the Center Waypoint. Lines
five and six display the Center Waypoint location in
terms of latitude and longitude.
5. Insert the Center Waypoints into the displayed flight
plan by returning to the CTR 1 page on the right side
and pressing
E
(figure 5-97). The Center
Waypoints are inserted into the flight plan in the cor-
rect order.
In the example above, the initial flight plan had just one
leg; however, the Center Waypoint feature may be used
with flight plans containing multiple legs as well. If
inserting the Center Waypoints would cause the number
of waypoints to exceed 30, then no Center Waypoints
are displayed and the CTR 1 page will display the state-
ment “NOT ENOUGH ROOM IN FPL”.
5.6.2 Viewing the Center Waypoints After Insertion
Into A Flight Plan
After the Center Waypoints have been inserted into a
flight plan, you may go back and view the CTR 2 pages
at any time. As long as you keep the same flight plan
page displayed on the left side of the screen, you may
view the Center Waypoints on the CTR 2 page(s) by
merely displaying the CTR 2 page(s). However, the
CTR 1 and CTR 2 pages revert to the format of figure 5-
94 anytime you leave the specific flight plan page on the
left side and then return to it. Under these circum-
stances you must press
E
to view the Center
Waypoints on the CTR 2 page(s).
Center Waypoints are stored as part of the user-defined
waypoints and are considered supplemental waypoints.
When Center Waypoints are viewed on the SUP page
or on the Active Waypoint (ACT) pages, they appear in
the normal supplemental waypoint format (figure 5-98).
Center Waypoints that are part of a flight plan show up
on the Other 3 (OTH 3) page. Center Waypoints that
are no longer part of a flight plan are deleted from the
list of user-defined waypoints when the KLN 900 is
turned off.
Figure 5-97
USE? INVRT?|
1:KLBB |
2:PVW00 |CTR WPT
3:BGD00 |INSERTION
4:GCK00 |COMPLETE
5:KMCK |
FPL 3 enr-leg CTR 1
Figure 5-98
| PVW00
|REF: PVW
|RAD: 001.2^
|DIS: 28.7nm
|N 34^33.21'
|W101^40.01'
SUP
Summary of Contents for KLN 900s
