Honeywell HUSS-E4V, User Manual

Page: 57 / 82

Honeywell
53
Figure 4-32 PTZ
Select the target channel number from 1~4 or All Channels to apply the settings.
Configure the PTZ setting of the channel as below:
Protocol – Select from the drop-down list, None, KD6, Schandome, Pelco-D, Pelco-P or
VCL.
Address – Enter the address of the PTZ.
Baudrate (bps) –Select from the drop-down list, 1200, 2400, 4800, 9600, 19200, 38400,
57600 or 115200.
Data Bits – Select from the drop-down list, 5, 6, 7or 8.
Stop Bits(s)
– Select from the drop-down list, 1, 1.5 or 2.
Parity
– Select from the drop-down list, None, Odd, Even, Mark or Space.