System Operation and Configuration
38
•
It is recommended that to eject the disk by user interface
operation, otherwise, it will damage the disk or cause data loss.
•
It is recommended that the ejection interval between two disks is
not less than 30 seconds.
Read/Write Type
•
To set a disk to READ-ONLY, right click the disk icon and select
Set
Read-Only
.
•
To set a disk to READ-WRITE, right click the disk icon and select
Set
Read-Write
.
Ejecting Disk
To remove a disk from the NVR, right click the disk icon and select “Eject” in the pop-up
menu and the below window will be displayed:
Figure 5-19 Confirm Disk Ejection
Click
OK
to eject the disk. If it is the only available disk for recording then the below window
is displayed:
Figure 5-20 Eject
Click
OK
to stop recording and eject the disk.
•
Do not directly pull out the disk during the ejection process.
•
Do not remove the disk while it is still working to avoid losing data
and do not plug in the disk during system start up.