manualshive.com logo in svg

Honeywell HRHD16+, User Manual

Share
Download
Honeywell HRHD16+ User Manual Download Page 18

Rev 3.01

xii

Document 900.0258

10/05

Important Safeguards

1.

Read Instructions

All the safety and operating instructions should be read before the appliance is 
operated.

2.

Retain Instructions

The safety and operating instructions should be retained for future reference.

3.

Cleaning

Unplug this equipment from the wall outlet before cleaning it. Do not use liquid 
aerosol cleaners. Use a damp soft cloth for cleaning.

4.

Attachments

Never add any attachments and/or equipment without the approval of the 
manufacturer as such additions may result in the risk of fire, electric shock, or 
other personal injury.

5.

Water and/or Moisture

Do not use this equipment near water or in contact with water.

6.

Accessories

Do not place this equipment on an unstable cart, stand, or table. The equipment 
may fall, causing serious injury to a child or adult, and serious damage to the 
equipment. Wall or shelf mounting should follow the manufacturer's instructions, 
and should use a mounting kit approved by the manufacturer.

This equipment and cart combination should be moved with care. Quick stops, 
excessive force, and uneven surfaces may cause the equipment and cart 
combination to overturn.

7.

Power Sources

This equipment should be operated only from the type of power source indicated 
on the marking label. If you are not sure of the type of power, please consult your 
equipment dealer or local power company.

8.

Power Cords

Operator or installer must remove power, BNC, alarm, and other connections 
before moving the equipment.

Summary of Contents for HRHD16+





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands