manualshive.com logo in svg

Honeywell HRHD16+, User Manual

Share
Download
Honeywell HRHD16+ User Manual Download Page 101

Operation

Rev 3.01

81

Document 900.0258

10/05

4

Operation

This chapter covers the following topics:

•

Live monitoring

•

Recording video

•

Recording audio

•

Playing recorded video

•

Searching for video by date/time, calendar, and events

Note

This chapter assumes you have correctly installed and 
configured your DVR. If you have not, please see 

Chapter 2

 for 

installation and 

Chapter 3

 for configuration.

The DVR controls are similar to a VCR. As with a VCR, the main functions are recording 
and playing back video. However, you have much greater control over recording and 
playing back video. You can:

•

Establish recording schedules based on time of day and day of the week

•

Search through the recorded video using much more sophisticated tools than 
those available with VCRs

Features of your DVR that are not available with traditional VCRs are:

•

Viewing video remotely

•

Recording video at the same time you are watching previously recorded video

The DVR operates even when no hard disk drives are installed. In this case recording, 
playback, and any processes that access hard disk drives are not supported. You can 
only view live video and establish system settings that are not related to hard disk drive 
operatin. Also, the unit can be connected with RAS (Remote Administration System) 
Watch either via Ethernet or modem.

Summary of Contents for HRHD16+





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands