Honeywell HRHD 410, User Manual

Page: 89 / 128

Configuration
Rev 3.03 71 Document 900.0315
02/07
To change the password, highlight the box below Password , and then press . A
window displays asking you to enter the current password. If you enter the correct
password, another window displays asking you to enter a new password using
the camera buttons. After you press
, another screen displays asking you to
confirm the new password.
Note The Admin and User passwords are composed of up to eight
digits using the camera buttons. The default User password is
1234 , and Admin password is 4321 .
Caution Write down the new password and save it in a secure place. If the
password is forgotten, the unit must be reset using the Factory
Reset Button and all data settings will be lost.
3. To lock front panel buttons, highlight Key-Lock On and then press . After the
buttons are locked, pressing any front panel button will cause a password screen
to display. You will need to enter the correct password to unlock the keys. The
Key Lock password is
4231 . The Administrator and User password also can be
used to unlock the keys.
4. To save your changes, highlight OK and then press . Select Cancel to exit the
screen without saving the changes.
Config (Configuration) Menu
Use the Config menu ( MENU
➤
Config ) to perform functions such as:
• Switch between Quick Setup and Normal Setup
• Copy video clips
• Load default setup
• Clear all data