Honeywell HRHD 410 User Manual Download

Page: 37 / 128

Configuration

Rev 3.03

Document 900.0315

02/07

PTZ buttons

•

Opens a Pan/Tilt/Zoom screen that allows you to control properly configured

PTZ cameras.

•

In PTZ mode, pressing

PTZ

enters the Digital Zoom mode.

Press PTZ again in

Digital Zoom mode to return to Live Monitoring mode. When a PTZ device is
not installed, press

PTZ

to enter the Digital Zoom mode directly.

•

Press

PTZ

in Playback mode to enter the Digital Zoom Playback mode.

Note

When the DVR is in the PTZ mode, a white line displays around the image.

Note

In Digital Zoom mode and Digital Zoom Playback mode, a bright small box
is laid over the image. The box indicates the spot to be enlarged.

PANIC

Start panic recording so that the DVR records video regardless of time-lapse or
event recording schedules. Press

PANIC

again to stop the panic recording.

Note

When the DVR is recording video, a red dot appears on the screen. When
the DVR is in panic recording mode, a white

displays in the red dot and

the REC LED on the front panel flickers.

ENTER/PAUSE

•

Select a highlighted item or complete an entry that you have made during
system setup.

•

Press

ENTER/PAUSE

in Live Monitoring mode to freeze the current live

screen. The screen displays *. Press

ENTER/PAUSE

again to return to Live

Monitoring mode.

•

Press

ENTER/PAUSE

in Playback mode to pause the video. The screen

displays .

Press

ENTER/PAUSE

again in pause mode to go to Live

Monitoring mode.

•

In Digital Zoom mode, press

ENTER/PAUSE

to enlarge a specific area of the

screen. The enlarged screen displays

Up, Down, Left,
Right Arrows

Use to:

•

Navigate through menus and GUI

•

Control Pan and Tilt when in PTZ mode

In playback mode, the

Up Arrow

button selects the next image and the

Down

Arrow

button selects the previous image.

Press the

Left Arrow

to play video backwards at high speed. Press the button

again to toggle the playback speed from

WWW

, and

WWWW

. The screen

displays

WWW

, and

WWWW

respectively.

Press the

Right Arrow

button to play video forward at high speed. Press the button

again to toggle the playback speed from

XXX

, and

XXXX

. The screen

displays

XXX

, and

XXXX

respectively.

Entering Playback mode from Live Monitoring mode can be user password
protected.

Table 3-1

Front Panel LEDs and Controls (cont’d)

Front panel

Function

Summary of Contents for HRHD 410

































































































































Search results

Summary of Contents for HRHD 410

Reviews:

Related manuals for HRHD 410

Brands by name

Popular brands

Honeywell HRHD 410, User Manual

Search results

Summary of Contents for HRHD 410

Reviews:

Related manuals for HRHD 410

Brands by name

Popular brands